// This file was automatically generated.  Do not modify.

'use strict';

Blockly.Msg["ADD_COMMENT"] = "添加注释";
Blockly.Msg["CANNOT_DELETE_VARIABLE_PROCEDURE"] = "不能删除变量“%1”，因为它是函数“%2”定义的一部分";
Blockly.Msg["CHANGE_VALUE_TITLE"] = "更改值：";
Blockly.Msg["CLEAN_UP"] = "整理块";
Blockly.Msg["COLLAPSED_WARNINGS_WARNING"] = "已收起的信息块内包含警告。";
Blockly.Msg["COLLAPSE_ALL"] = "折叠块";
Blockly.Msg["COLLAPSE_BLOCK"] = "折叠块";
Blockly.Msg["COLOUR_BLEND_COLOUR1"] = "颜色1";
Blockly.Msg["COLOUR_BLEND_COLOUR2"] = "颜色2";
Blockly.Msg["COLOUR_BLEND_HELPURL"] = "https://meyerweb.com/eric/tools/color-blend/#:::rgbp";  // untranslated
Blockly.Msg["COLOUR_BLEND_RATIO"] = "比例";
Blockly.Msg["COLOUR_BLEND_TITLE"] = "混合";
Blockly.Msg["COLOUR_BLEND_TOOLTIP"] = "把两种颜色以一个给定的比例(0.0-1.0)进行混合。";
Blockly.Msg["COLOUR_PICKER_HELPURL"] = "https://zh.wikipedia.org/wiki/颜色";
Blockly.Msg["COLOUR_PICKER_TOOLTIP"] = "从调色板中选择一种颜色。";
Blockly.Msg["COLOUR_RANDOM_HELPURL"] = "http://randomcolour.com";  // untranslated
Blockly.Msg["COLOUR_RANDOM_TITLE"] = "随机颜色";
Blockly.Msg["COLOUR_RANDOM_TOOLTIP"] = "随机选择一种颜色。";
Blockly.Msg["COLOUR_RGB_BLUE"] = "蓝色";
Blockly.Msg["COLOUR_RGB_GREEN"] = "绿色";
Blockly.Msg["COLOUR_RGB_HELPURL"] = "https://www.december.com/html/spec/colorpercompact.html";  // untranslated
Blockly.Msg["COLOUR_RGB_RED"] = "红色";
Blockly.Msg["COLOUR_RGB_TITLE"] = "颜色";
Blockly.Msg["COLOUR_RGB_TOOLTIP"] = "通过指定红色、绿色和蓝色的量创建一种颜色。所有的值必须在0和100之间。";
Blockly.Msg["CONTROLS_FLOW_STATEMENTS_HELPURL"] = "https://github.com/google/blockly/wiki/Loops#loop-termination-blocks";  // untranslated
Blockly.Msg["CONTROLS_FLOW_STATEMENTS_OPERATOR_BREAK"] = "跳出循环";
Blockly.Msg["CONTROLS_FLOW_STATEMENTS_OPERATOR_CONTINUE"] = "继续下一轮循环";
Blockly.Msg["CONTROLS_FLOW_STATEMENTS_TOOLTIP_BREAK"] = "跳出包含它的循环。";
Blockly.Msg["CONTROLS_FLOW_STATEMENTS_TOOLTIP_CONTINUE"] = "跳过本轮循环的剩余部分，并继进行续下一轮迭代。";
Blockly.Msg["CONTROLS_FLOW_STATEMENTS_WARNING"] = "警告：这个块只能在循环内使用。";
Blockly.Msg["CONTROLS_FOREACH_HELPURL"] = "https://github.com/google/blockly/wiki/Loops#for-each";  // untranslated
Blockly.Msg["CONTROLS_FOREACH_TITLE"] = "为列表 %2 里的每一项 %1";
Blockly.Msg["CONTROLS_FOREACH_TOOLTIP"] = "遍历列表中的每一项，将变量“%1”设为所选项，并执行一些语句。";
Blockly.Msg["CONTROLS_FOR_HELPURL"] = "https://github.com/google/blockly/wiki/Loops#count-with";  // untranslated
Blockly.Msg["CONTROLS_FOR_TITLE"] = "变量 %1 从 %2 数到 %3 每次增加 %4";
Blockly.Msg["CONTROLS_FOR_TOOLTIP"] = "用变量%1记录从开始数值到终止数值之间的数值，数值按指定间隔增加，并执行指定的块。";
Blockly.Msg["CONTROLS_IF_ELSEIF_TOOLTIP"] = "在这个if语句块中增加一个条件。";
Blockly.Msg["CONTROLS_IF_ELSE_TOOLTIP"] = "在这个if语句块中添加一个最终的，包括所有其余情况的条件。";
Blockly.Msg["CONTROLS_IF_HELPURL"] = "https://github.com/google/blockly/wiki/IfElse";  // untranslated
Blockly.Msg["CONTROLS_IF_IF_TOOLTIP"] = "增加、删除或重新排列各节来重新配置这个if语句块。";
Blockly.Msg["CONTROLS_IF_MSG_ELSE"] = "否则";
Blockly.Msg["CONTROLS_IF_MSG_ELSEIF"] = "否则如果";
Blockly.Msg["CONTROLS_IF_MSG_IF"] = "如果";
Blockly.Msg["CONTROLS_IF_TOOLTIP_1"] = "如果值为真，执行一些语句。";
Blockly.Msg["CONTROLS_IF_TOOLTIP_2"] = "如果值为真，则执行第一块语句。否则，则执行第二块语句。";
Blockly.Msg["CONTROLS_IF_TOOLTIP_3"] = "如果第一个值为真，则执行第一块的语句。否则，如果第二个值为真，则执行第二块的语句。";
Blockly.Msg["CONTROLS_IF_TOOLTIP_4"] = "如果第一个值为真，则执行第一块对语句。否则，如果第二个值为真，则执行语句的第二块。如果没有值为真，则执行最后一块的语句。";
Blockly.Msg["CONTROLS_REPEAT_HELPURL"] = "https://zh.wikipedia.org/wiki/For循环";
Blockly.Msg["CONTROLS_REPEAT_INPUT_DO"] = "执行";
Blockly.Msg["CONTROLS_REPEAT_TITLE"] = "重复 %1 次";
Blockly.Msg["CONTROLS_REPEAT_TOOLTIP"] = "多次执行一些语句。";
Blockly.Msg["CONTROLS_WHILEUNTIL_HELPURL"] = "https://github.com/google/blockly/wiki/Loops#repeat";  // untranslated
Blockly.Msg["CONTROLS_WHILEUNTIL_OPERATOR_UNTIL"] = "重复直到条件满足";
Blockly.Msg["CONTROLS_WHILEUNTIL_OPERATOR_WHILE"] = "当条件满足时重复";
Blockly.Msg["CONTROLS_WHILEUNTIL_TOOLTIP_UNTIL"] = "只要值为假，执行一些语句。";
Blockly.Msg["CONTROLS_WHILEUNTIL_TOOLTIP_WHILE"] = "只要值为真，执行一些语句。";
Blockly.Msg["DELETE_ALL_BLOCKS"] = "删除所有 %1 个块吗？";
Blockly.Msg["DELETE_BLOCK"] = "删除块";
Blockly.Msg["DELETE_VARIABLE"] = "删除变量“%1”";
Blockly.Msg["DELETE_VARIABLE_CONFIRMATION"] = "要删除对变量“%2”的%1个引用吗？";
Blockly.Msg["DELETE_X_BLOCKS"] = "删除 %1 个块";
Blockly.Msg["DISABLE_BLOCK"] = "禁用块";
Blockly.Msg["DUPLICATE_BLOCK"] = "复制";
Blockly.Msg["DUPLICATE_COMMENT"] = "复制注释";
Blockly.Msg["ENABLE_BLOCK"] = "启用块";
Blockly.Msg["EXPAND_ALL"] = "展开块";
Blockly.Msg["EXPAND_BLOCK"] = "展开块";
Blockly.Msg["EXTERNAL_INPUTS"] = "外部输入";
Blockly.Msg["HELP"] = "帮助";
Blockly.Msg["INLINE_INPUTS"] = "单行输入";
Blockly.Msg["IOS_CANCEL"] = "取消";
Blockly.Msg["IOS_ERROR"] = "错误";
Blockly.Msg["IOS_OK"] = "确定";
Blockly.Msg["IOS_PROCEDURES_ADD_INPUT"] = "+添加输入";
Blockly.Msg["IOS_PROCEDURES_ALLOW_STATEMENTS"] = "允许的语句";
Blockly.Msg["IOS_PROCEDURES_DUPLICATE_INPUTS_ERROR"] = "这个函数有多个输入。";
Blockly.Msg["IOS_PROCEDURES_INPUTS"] = "输入";
Blockly.Msg["IOS_VARIABLES_ADD_BUTTON"] = "添加";
Blockly.Msg["IOS_VARIABLES_ADD_VARIABLE"] = "+添加变量";
Blockly.Msg["IOS_VARIABLES_DELETE_BUTTON"] = "删除";
Blockly.Msg["IOS_VARIABLES_EMPTY_NAME_ERROR"] = "你不能使用空白的变量名。";
Blockly.Msg["IOS_VARIABLES_RENAME_BUTTON"] = "重命名";
Blockly.Msg["IOS_VARIABLES_VARIABLE_NAME"] = "变量名";
Blockly.Msg["LISTS_CREATE_EMPTY_HELPURL"] = "https://github.com/google/blockly/wiki/Lists#create-empty-list";
Blockly.Msg["LISTS_CREATE_EMPTY_TITLE"] = "创建空列表";
Blockly.Msg["LISTS_CREATE_EMPTY_TOOLTIP"] = "返回一个列表，长度为 0，不包含任何数据记录";
Blockly.Msg["LISTS_CREATE_WITH_CONTAINER_TITLE_ADD"] = "列表";
Blockly.Msg["LISTS_CREATE_WITH_CONTAINER_TOOLTIP"] = "增加、删除或重新排列各部分以此重新配置这个列表块。";
Blockly.Msg["LISTS_CREATE_WITH_HELPURL"] = "https://github.com/google/blockly/wiki/Lists#create-list-with";
Blockly.Msg["LISTS_CREATE_WITH_INPUT_WITH"] = "建立列表从";
Blockly.Msg["LISTS_CREATE_WITH_ITEM_TOOLTIP"] = "将一个项添加到列表中。";
Blockly.Msg["LISTS_CREATE_WITH_TOOLTIP"] = "建立一个具有任意数量项目的列表。";
Blockly.Msg["LISTS_GET_INDEX_FIRST"] = "第一个";
Blockly.Msg["LISTS_GET_INDEX_FROM_END"] = "倒数第#";
Blockly.Msg["LISTS_GET_INDEX_FROM_START"] = "#";
Blockly.Msg["LISTS_GET_INDEX_GET"] = "取得";
Blockly.Msg["LISTS_GET_INDEX_GET_REMOVE"] = "取得并移除";
Blockly.Msg["LISTS_GET_INDEX_LAST"] = "最后一个";
Blockly.Msg["LISTS_GET_INDEX_RANDOM"] = "随机的";
Blockly.Msg["LISTS_GET_INDEX_REMOVE"] = "移除";
Blockly.Msg["LISTS_GET_INDEX_TAIL"] = "-";
Blockly.Msg["LISTS_GET_INDEX_TOOLTIP_GET_FIRST"] = "返回列表中的第一项。";
Blockly.Msg["LISTS_GET_INDEX_TOOLTIP_GET_FROM"] = "返回在列表中的指定位置的项。";
Blockly.Msg["LISTS_GET_INDEX_TOOLTIP_GET_LAST"] = "返回列表中的最后一项。";
Blockly.Msg["LISTS_GET_INDEX_TOOLTIP_GET_RANDOM"] = "返回列表中的随机一项。";
Blockly.Msg["LISTS_GET_INDEX_TOOLTIP_GET_REMOVE_FIRST"] = "移除并返回列表中的第一项。";
Blockly.Msg["LISTS_GET_INDEX_TOOLTIP_GET_REMOVE_FROM"] = "移除并返回列表中的指定位置的项。";
Blockly.Msg["LISTS_GET_INDEX_TOOLTIP_GET_REMOVE_LAST"] = "移除并返回列表中的最后一项。";
Blockly.Msg["LISTS_GET_INDEX_TOOLTIP_GET_REMOVE_RANDOM"] = "移除并返回列表中的随机一项。";
Blockly.Msg["LISTS_GET_INDEX_TOOLTIP_REMOVE_FIRST"] = "移除列表中的第一项";
Blockly.Msg["LISTS_GET_INDEX_TOOLTIP_REMOVE_FROM"] = "移除在列表中的指定位置的项。";
Blockly.Msg["LISTS_GET_INDEX_TOOLTIP_REMOVE_LAST"] = "移除列表中的最后一项";
Blockly.Msg["LISTS_GET_INDEX_TOOLTIP_REMOVE_RANDOM"] = "删除列表中的随机一项。";
Blockly.Msg["LISTS_GET_SUBLIST_END_FROM_END"] = "到倒数第#";
Blockly.Msg["LISTS_GET_SUBLIST_END_FROM_START"] = "到#";
Blockly.Msg["LISTS_GET_SUBLIST_END_LAST"] = "到最后";
Blockly.Msg["LISTS_GET_SUBLIST_HELPURL"] = "https://github.com/google/blockly/wiki/Lists#getting-a-sublist";  // untranslated
Blockly.Msg["LISTS_GET_SUBLIST_START_FIRST"] = "获取子列表从第一个";
Blockly.Msg["LISTS_GET_SUBLIST_START_FROM_END"] = "获取子列表从最后一个#";
Blockly.Msg["LISTS_GET_SUBLIST_START_FROM_START"] = "获取子列表从#";
Blockly.Msg["LISTS_GET_SUBLIST_TAIL"] = "-";
Blockly.Msg["LISTS_GET_SUBLIST_TOOLTIP"] = "复制列表中指定的部分。";
Blockly.Msg["LISTS_INDEX_FROM_END_TOOLTIP"] = "%1是最后一项。";
Blockly.Msg["LISTS_INDEX_FROM_START_TOOLTIP"] = "%1是第一项。";
Blockly.Msg["LISTS_INDEX_OF_FIRST"] = "寻找第一次出现的项";
Blockly.Msg["LISTS_INDEX_OF_HELPURL"] = "https://github.com/google/blockly/wiki/Lists#getting-items-from-a-list";  // untranslated
Blockly.Msg["LISTS_INDEX_OF_LAST"] = "寻找最后一次出现的项";
Blockly.Msg["LISTS_INDEX_OF_TOOLTIP"] = "返回在列表中的第一/最后一个匹配项的索引值。如果找不到项目则返回%1。";
Blockly.Msg["LISTS_INLIST"] = "在列表中";
Blockly.Msg["LISTS_ISEMPTY_HELPURL"] = "https://github.com/google/blockly/wiki/Lists#is-empty";  // untranslated
Blockly.Msg["LISTS_ISEMPTY_TITLE"] = "%1是空的";
Blockly.Msg["LISTS_ISEMPTY_TOOLTIP"] = "如果改列表为空，则返回真。";
Blockly.Msg["LISTS_LENGTH_HELPURL"] = "https://github.com/google/blockly/wiki/Lists#length-of";  // untranslated
Blockly.Msg["LISTS_LENGTH_TITLE"] = "%1的长度";
Blockly.Msg["LISTS_LENGTH_TOOLTIP"] = "返回列表的长度。";
Blockly.Msg["LISTS_REPEAT_HELPURL"] = "https://github.com/google/blockly/wiki/Lists#create-list-with";  // untranslated
Blockly.Msg["LISTS_REPEAT_TITLE"] = "建立列表使用项 %1 重复 %2 次";
Blockly.Msg["LISTS_REPEAT_TOOLTIP"] = "建立包含指定重复次数的值的列表。";
Blockly.Msg["LISTS_REVERSE_HELPURL"] = "https://github.com/google/blockly/wiki/Lists#reversing-a-list";
Blockly.Msg["LISTS_REVERSE_MESSAGE0"] = "倒转%1";
Blockly.Msg["LISTS_REVERSE_TOOLTIP"] = "倒转一个列表的拷贝。";
Blockly.Msg["LISTS_SET_INDEX_HELPURL"] = "https://github.com/google/blockly/wiki/Lists#in-list--set";  // untranslated
Blockly.Msg["LISTS_SET_INDEX_INPUT_TO"] = "值为";
Blockly.Msg["LISTS_SET_INDEX_INSERT"] = "插入在";
Blockly.Msg["LISTS_SET_INDEX_SET"] = "设置";
Blockly.Msg["LISTS_SET_INDEX_TOOLTIP_INSERT_FIRST"] = "在列表的起始处添加该项。";
Blockly.Msg["LISTS_SET_INDEX_TOOLTIP_INSERT_FROM"] = "插入在列表中指定位置的项。";
Blockly.Msg["LISTS_SET_INDEX_TOOLTIP_INSERT_LAST"] = "在列表的末尾处添加该项。";
Blockly.Msg["LISTS_SET_INDEX_TOOLTIP_INSERT_RANDOM"] = "在列表的随机位置插入该项。";
Blockly.Msg["LISTS_SET_INDEX_TOOLTIP_SET_FIRST"] = "设置列表中的第一项。";
Blockly.Msg["LISTS_SET_INDEX_TOOLTIP_SET_FROM"] = "设置在列表中指定位置的项。";
Blockly.Msg["LISTS_SET_INDEX_TOOLTIP_SET_LAST"] = "设置列表中的最后一项。";
Blockly.Msg["LISTS_SET_INDEX_TOOLTIP_SET_RANDOM"] = "设置列表中的随机一项。";
Blockly.Msg["LISTS_SORT_HELPURL"] = "https://github.com/google/blockly/wiki/Lists#sorting-a-list";
Blockly.Msg["LISTS_SORT_ORDER_ASCENDING"] = "升序";
Blockly.Msg["LISTS_SORT_ORDER_DESCENDING"] = "降序";
Blockly.Msg["LISTS_SORT_TITLE"] = "排序%1 %2 %3";
Blockly.Msg["LISTS_SORT_TOOLTIP"] = "排序一个列表的拷贝。";
Blockly.Msg["LISTS_SORT_TYPE_IGNORECASE"] = "按字母排序，忽略大小写";
Blockly.Msg["LISTS_SORT_TYPE_NUMERIC"] = "按数字排序";
Blockly.Msg["LISTS_SORT_TYPE_TEXT"] = "按字母排序";
Blockly.Msg["LISTS_SPLIT_HELPURL"] = "https://github.com/google/blockly/wiki/Lists#splitting-strings-and-joining-lists";
Blockly.Msg["LISTS_SPLIT_LIST_FROM_TEXT"] = "从文本制作列表";
Blockly.Msg["LISTS_SPLIT_TEXT_FROM_LIST"] = "从列表拆出文本";
Blockly.Msg["LISTS_SPLIT_TOOLTIP_JOIN"] = "加入文本列表至一个文本，由分隔符分隔。";
Blockly.Msg["LISTS_SPLIT_TOOLTIP_SPLIT"] = "拆分文本到文本列表，按每个分隔符拆分。";
Blockly.Msg["LISTS_SPLIT_WITH_DELIMITER"] = "用分隔符";
Blockly.Msg["LOGIC_BOOLEAN_FALSE"] = "假";
Blockly.Msg["LOGIC_BOOLEAN_HELPURL"] = "https://github.com/google/blockly/wiki/Logic#values";  // untranslated
Blockly.Msg["LOGIC_BOOLEAN_TOOLTIP"] = "返回真或假。";
Blockly.Msg["LOGIC_BOOLEAN_TRUE"] = "真";
Blockly.Msg["LOGIC_COMPARE_HELPURL"] = "https://zh.wikipedia.org/wiki/不等";
Blockly.Msg["LOGIC_COMPARE_TOOLTIP_EQ"] = "如果两个输入结果相等，则返回真。";
Blockly.Msg["LOGIC_COMPARE_TOOLTIP_GT"] = "如果第一个输入结果比第二个大，则返回真。";
Blockly.Msg["LOGIC_COMPARE_TOOLTIP_GTE"] = "如果第一个输入结果大于或等于第二个输入结果，则返回真。";
Blockly.Msg["LOGIC_COMPARE_TOOLTIP_LT"] = "如果第一个输入结果比第二个小，则返回真。";
Blockly.Msg["LOGIC_COMPARE_TOOLTIP_LTE"] = "如果第一个输入结果小于或等于第二个输入结果，则返回真。";
Blockly.Msg["LOGIC_COMPARE_TOOLTIP_NEQ"] = "如果两个输入结果不相等，则返回真。";
Blockly.Msg["LOGIC_NEGATE_HELPURL"] = "https://github.com/google/blockly/wiki/Logic#not";
Blockly.Msg["LOGIC_NEGATE_TITLE"] = "非%1";
Blockly.Msg["LOGIC_NEGATE_TOOLTIP"] = "如果输入结果为假，则返回真；如果输入结果为真，则返回假。";
Blockly.Msg["LOGIC_NULL"] = "空";
Blockly.Msg["LOGIC_NULL_HELPURL"] = "https://en.wikipedia.org/wiki/Nullable_type";  // untranslated
Blockly.Msg["LOGIC_NULL_TOOLTIP"] = "返回空值。";
Blockly.Msg["LOGIC_OPERATION_AND"] = "并且";
Blockly.Msg["LOGIC_OPERATION_HELPURL"] = "https://github.com/google/blockly/wiki/Logic#logical-operations";  // untranslated
Blockly.Msg["LOGIC_OPERATION_OR"] = "或";
Blockly.Msg["LOGIC_OPERATION_TOOLTIP_AND"] = "如果两个输入结果都为真，则返回真。";
Blockly.Msg["LOGIC_OPERATION_TOOLTIP_OR"] = "如果至少有一个输入结果为真，则返回真。";
Blockly.Msg["LOGIC_TERNARY_CONDITION"] = "断言";
Blockly.Msg["LOGIC_TERNARY_HELPURL"] = "https://zh.wikipedia.org/wiki/条件运算符";
Blockly.Msg["LOGIC_TERNARY_IF_FALSE"] = "如果为假";
Blockly.Msg["LOGIC_TERNARY_IF_TRUE"] = "如果为真";
Blockly.Msg["LOGIC_TERNARY_TOOLTIP"] = "检查“断言”里的条件语句。如果条件为真，则返回“如果为真”的值，否则，则返回“如果为假”的值。";
Blockly.Msg["MATH_ADDITION_SYMBOL"] = "+";  // untranslated
Blockly.Msg["MATH_ARITHMETIC_HELPURL"] = "https://zh.wikipedia.org/wiki/算术";
Blockly.Msg["MATH_ARITHMETIC_TOOLTIP_ADD"] = "返回两个数值的和。";
Blockly.Msg["MATH_ARITHMETIC_TOOLTIP_DIVIDE"] = "返回两个数值的商。";
Blockly.Msg["MATH_ARITHMETIC_TOOLTIP_MINUS"] = "返回两个数值的差值。";
Blockly.Msg["MATH_ARITHMETIC_TOOLTIP_MULTIPLY"] = "返回两个数值的乘积。";
Blockly.Msg["MATH_ARITHMETIC_TOOLTIP_POWER"] = "返回以第一个数值为底数，以第二个数值为幂的结果。";
Blockly.Msg["MATH_ATAN2_HELPURL"] = "https://zh.wikipedia.org/wiki/反正切2";
Blockly.Msg["MATH_ATAN2_TITLE"] = "点(x:%1,y:%2)的方位角";
Blockly.Msg["MATH_ATAN2_TOOLTIP"] = "返回点（X，Y）的反正切值，范围为-180到180度。";
Blockly.Msg["MATH_CHANGE_HELPURL"] = "https://zh.wikipedia.org/wiki/加法";
Blockly.Msg["MATH_CHANGE_TITLE"] = "将 %1 增加 %2";
Blockly.Msg["MATH_CHANGE_TOOLTIP"] = "为变量“%1”增加一个数值。";
Blockly.Msg["MATH_CONSTANT_HELPURL"] = "https://zh.wikipedia.org/wiki/数学常数";
Blockly.Msg["MATH_CONSTANT_TOOLTIP"] = "返回一个常见常量：π (3.141…)、e (2.718…)、φ (1.618…)、平方根 (1.414…)、开平方根 (0.707…)或∞ (无限大)。";
Blockly.Msg["MATH_CONSTRAIN_HELPURL"] = "https://en.wikipedia.org/wiki/Clamping_(graphics)";  // untranslated
Blockly.Msg["MATH_CONSTRAIN_TITLE"] = "将 %1 限制在 最低 %2 到最高 %3 之间";
Blockly.Msg["MATH_CONSTRAIN_TOOLTIP"] = "将一个数值限制在两个指定的数值范围（含边界）之间。";
Blockly.Msg["MATH_DIVISION_SYMBOL"] = "÷";  // untranslated
Blockly.Msg["MATH_IS_DIVISIBLE_BY"] = "可被整除";
Blockly.Msg["MATH_IS_EVEN"] = "是偶数";
Blockly.Msg["MATH_IS_NEGATIVE"] = "是负数";
Blockly.Msg["MATH_IS_ODD"] = "是奇数";
Blockly.Msg["MATH_IS_POSITIVE"] = "是正数";
Blockly.Msg["MATH_IS_PRIME"] = "是质数";
Blockly.Msg["MATH_IS_TOOLTIP"] = "检查一个数值是否是偶数、奇数、质数、自然数、正数、负数或者是否能被某数整除。返回真或假。";
Blockly.Msg["MATH_IS_WHOLE"] = "是整数";
Blockly.Msg["MATH_MODULO_HELPURL"] = "https://zh.wikipedia.org/wiki/模除";
Blockly.Msg["MATH_MODULO_TITLE"] = "取 %1 ÷ %2 的余数";
Blockly.Msg["MATH_MODULO_TOOLTIP"] = "返回这两个数字相除后的余数。";
Blockly.Msg["MATH_MULTIPLICATION_SYMBOL"] = "×";  // untranslated
Blockly.Msg["MATH_NUMBER_HELPURL"] = "https://zh.wikipedia.org/wiki/数";
Blockly.Msg["MATH_NUMBER_TOOLTIP"] = "一个数值。";
Blockly.Msg["MATH_ONLIST_HELPURL"] = "";  // untranslated
Blockly.Msg["MATH_ONLIST_OPERATOR_AVERAGE"] = "列表平均值";
Blockly.Msg["MATH_ONLIST_OPERATOR_MAX"] = "列表最大值";
Blockly.Msg["MATH_ONLIST_OPERATOR_MEDIAN"] = "列表中位数";
Blockly.Msg["MATH_ONLIST_OPERATOR_MIN"] = "列表最小值";
Blockly.Msg["MATH_ONLIST_OPERATOR_MODE"] = "列表中的众数";
Blockly.Msg["MATH_ONLIST_OPERATOR_RANDOM"] = "列表随机项";
Blockly.Msg["MATH_ONLIST_OPERATOR_STD_DEV"] = "列表的标准差";
Blockly.Msg["MATH_ONLIST_OPERATOR_SUM"] = "列表中数值的和";
Blockly.Msg["MATH_ONLIST_TOOLTIP_AVERAGE"] = "返回列表中的数值的平均值。";
Blockly.Msg["MATH_ONLIST_TOOLTIP_MAX"] = "返回列表中最大值。";
Blockly.Msg["MATH_ONLIST_TOOLTIP_MEDIAN"] = "返回列表中数值的中位数。";
Blockly.Msg["MATH_ONLIST_TOOLTIP_MIN"] = "返回列表中最小值。";
Blockly.Msg["MATH_ONLIST_TOOLTIP_MODE"] = "返回列表中的出现次数最多的项的列表。";
Blockly.Msg["MATH_ONLIST_TOOLTIP_RANDOM"] = "从列表中返回一个随机的元素。";
Blockly.Msg["MATH_ONLIST_TOOLTIP_STD_DEV"] = "返回列表的标准差。";
Blockly.Msg["MATH_ONLIST_TOOLTIP_SUM"] = "返回列表中的所有数值的和。";
Blockly.Msg["MATH_POWER_SYMBOL"] = "^";  // untranslated
Blockly.Msg["MATH_RANDOM_FLOAT_HELPURL"] = "https://zh.wikipedia.org/wiki/随机数生成器";
Blockly.Msg["MATH_RANDOM_FLOAT_TITLE_RANDOM"] = "随机小数";
Blockly.Msg["MATH_RANDOM_FLOAT_TOOLTIP"] = "返回一个介于0.0到1.0之间（含边界）的随机数。";
Blockly.Msg["MATH_RANDOM_INT_HELPURL"] = "https://zh.wikipedia.org/wiki/随机数生成器";
Blockly.Msg["MATH_RANDOM_INT_TITLE"] = "从 %1 到 %2 范围内的随机整数";
Blockly.Msg["MATH_RANDOM_INT_TOOLTIP"] = "返回一个限制在两个指定数值的范围（含边界）之间的随机整数。";
Blockly.Msg["MATH_ROUND_HELPURL"] = "https://zh.wikipedia.org/wiki/数值修约";
Blockly.Msg["MATH_ROUND_OPERATOR_ROUND"] = "四舍五入";
Blockly.Msg["MATH_ROUND_OPERATOR_ROUNDDOWN"] = "向下舍入";
Blockly.Msg["MATH_ROUND_OPERATOR_ROUNDUP"] = "向上舍入";
Blockly.Msg["MATH_ROUND_TOOLTIP"] = "数字向上或向下舍入。";
Blockly.Msg["MATH_SINGLE_HELPURL"] = "https://zh.wikipedia.org/wiki/平方根";
Blockly.Msg["MATH_SINGLE_OP_ABSOLUTE"] = "绝对值";
Blockly.Msg["MATH_SINGLE_OP_ROOT"] = "平方根";
Blockly.Msg["MATH_SINGLE_TOOLTIP_ABS"] = "返回一个数值的绝对值。";
Blockly.Msg["MATH_SINGLE_TOOLTIP_EXP"] = "返回一个数值的e次幂。";
Blockly.Msg["MATH_SINGLE_TOOLTIP_LN"] = "返回一个数值的自然对数。";
Blockly.Msg["MATH_SINGLE_TOOLTIP_LOG10"] = "返回一个数值的以10为底的对数。";
Blockly.Msg["MATH_SINGLE_TOOLTIP_NEG"] = "返回一个数值的相反数。";
Blockly.Msg["MATH_SINGLE_TOOLTIP_POW10"] = "返回一个数值的10次幂。";
Blockly.Msg["MATH_SINGLE_TOOLTIP_ROOT"] = "返回一个数的平方根。";
Blockly.Msg["MATH_SUBTRACTION_SYMBOL"] = "-";  // untranslated
Blockly.Msg["MATH_TRIG_ACOS"] = "acos";  // untranslated
Blockly.Msg["MATH_TRIG_ASIN"] = "asin";  // untranslated
Blockly.Msg["MATH_TRIG_ATAN"] = "atan";  // untranslated
Blockly.Msg["MATH_TRIG_COS"] = "cos";  // untranslated
Blockly.Msg["MATH_TRIG_HELPURL"] = "https://zh.wikipedia.org/wiki/三角函数";
Blockly.Msg["MATH_TRIG_SIN"] = "sin";  // untranslated
Blockly.Msg["MATH_TRIG_TAN"] = "tan";  // untranslated
Blockly.Msg["MATH_TRIG_TOOLTIP_ACOS"] = "返回一个数值的反余弦值。";
Blockly.Msg["MATH_TRIG_TOOLTIP_ASIN"] = "返回一个数值的反正弦值。";
Blockly.Msg["MATH_TRIG_TOOLTIP_ATAN"] = "返回一个数值的反正切值。";
Blockly.Msg["MATH_TRIG_TOOLTIP_COS"] = "返回指定角度的余弦值(非弧度）。";
Blockly.Msg["MATH_TRIG_TOOLTIP_SIN"] = "返回指定角度的正弦值(非弧度）。";
Blockly.Msg["MATH_TRIG_TOOLTIP_TAN"] = "返回指定角度的正切值(非弧度）。";
Blockly.Msg["NEW_COLOUR_VARIABLE"] = "创建颜色变量...";
Blockly.Msg["NEW_NUMBER_VARIABLE"] = "创建数字变量...";
Blockly.Msg["NEW_STRING_VARIABLE"] = "创建字符串变量...";
Blockly.Msg["NEW_VARIABLE"] = "创建变量...";
Blockly.Msg["NEW_VARIABLE_TITLE"] = "新变量的名称：";
Blockly.Msg["NEW_VARIABLE_TYPE_TITLE"] = "新变量的类型：";
Blockly.Msg["ORDINAL_NUMBER_SUFFIX"] = "-";
Blockly.Msg["PROCEDURES_ALLOW_STATEMENTS"] = "允许声明";
Blockly.Msg["PROCEDURES_BEFORE_PARAMS"] = "与：";
Blockly.Msg["PROCEDURES_CALLNORETURN_HELPURL"] = "https://zh.wikipedia.org/wiki/子程序";
Blockly.Msg["PROCEDURES_CALLNORETURN_TOOLTIP"] = "运行用户定义的函数“%1”。";
Blockly.Msg["PROCEDURES_CALLRETURN_HELPURL"] = "https://zh.wikipedia.org/wiki/子程序";
Blockly.Msg["PROCEDURES_CALLRETURN_TOOLTIP"] = "运行用户定义的函数“%1”，并使用它的输出值。";
Blockly.Msg["PROCEDURES_CALL_BEFORE_PARAMS"] = "与：";
Blockly.Msg["PROCEDURES_CREATE_DO"] = "创建“%1”";
Blockly.Msg["PROCEDURES_DEFNORETURN_COMMENT"] = "描述该功能...";
Blockly.Msg["PROCEDURES_DEFNORETURN_DO"] = "-";
Blockly.Msg["PROCEDURES_DEFNORETURN_HELPURL"] = "https://zh.wikipedia.org/wiki/子程序";
Blockly.Msg["PROCEDURES_DEFNORETURN_PROCEDURE"] = "做点什么";
Blockly.Msg["PROCEDURES_DEFNORETURN_TITLE"] = "至";
Blockly.Msg["PROCEDURES_DEFNORETURN_TOOLTIP"] = "创建一个不带输出值的函数。";
Blockly.Msg["PROCEDURES_DEFRETURN_HELPURL"] = "https://zh.wikipedia.org/wiki/子程序";
Blockly.Msg["PROCEDURES_DEFRETURN_RETURN"] = "返回";
Blockly.Msg["PROCEDURES_DEFRETURN_TOOLTIP"] = "创建一个有输出值的函数。";
Blockly.Msg["PROCEDURES_DEF_DUPLICATE_WARNING"] = "警告：此函数具有重复参数。";
Blockly.Msg["PROCEDURES_HIGHLIGHT_DEF"] = "突出显示函数定义";
Blockly.Msg["PROCEDURES_IFRETURN_HELPURL"] = "http://c2.com/cgi/wiki?GuardClause";
Blockly.Msg["PROCEDURES_IFRETURN_TOOLTIP"] = "如果值为真，则返回第二个值。";
Blockly.Msg["PROCEDURES_IFRETURN_WARNING"] = "警告：这个块只能在函数内部使用。";
Blockly.Msg["PROCEDURES_MUTATORARG_TITLE"] = "输入名称：";
Blockly.Msg["PROCEDURES_MUTATORARG_TOOLTIP"] = "添加函数输入。";
Blockly.Msg["PROCEDURES_MUTATORCONTAINER_TITLE"] = "输入";
Blockly.Msg["PROCEDURES_MUTATORCONTAINER_TOOLTIP"] = "添加、移除或重新排此函数的输入。";
Blockly.Msg["REDO"] = "重做";
Blockly.Msg["REMOVE_COMMENT"] = "删除注释";
Blockly.Msg["RENAME_VARIABLE"] = "重命名变量...";
Blockly.Msg["RENAME_VARIABLE_TITLE"] = "将所有“%1”变量重命名为:";
Blockly.Msg["TEXT_APPEND_HELPURL"] = "https://github.com/google/blockly/wiki/Text#text-modification";  // untranslated
Blockly.Msg["TEXT_APPEND_TITLE"] = "向%1附加文本%2";
Blockly.Msg["TEXT_APPEND_TOOLTIP"] = "将一些文本追加到变量“%1”里。";
Blockly.Msg["TEXT_CHANGECASE_HELPURL"] = "https://github.com/google/blockly/wiki/Text#adjusting-text-case";  // untranslated
Blockly.Msg["TEXT_CHANGECASE_OPERATOR_LOWERCASE"] = "转为小写";
Blockly.Msg["TEXT_CHANGECASE_OPERATOR_TITLECASE"] = "转为首字母大写";
Blockly.Msg["TEXT_CHANGECASE_OPERATOR_UPPERCASE"] = "转为大写";
Blockly.Msg["TEXT_CHANGECASE_TOOLTIP"] = "用不同的大小写模式复制并返回这段文字。";
Blockly.Msg["TEXT_CHARAT_FIRST"] = "寻找第一个字母";
Blockly.Msg["TEXT_CHARAT_FROM_END"] = "获取字符从倒数#";
Blockly.Msg["TEXT_CHARAT_FROM_START"] = "获取字符从#";
Blockly.Msg["TEXT_CHARAT_HELPURL"] = "https://github.com/google/blockly/wiki/Text#extracting-text";  // untranslated
Blockly.Msg["TEXT_CHARAT_LAST"] = "寻找最后一个字母";
Blockly.Msg["TEXT_CHARAT_RANDOM"] = "寻找随机的字母";
Blockly.Msg["TEXT_CHARAT_TAIL"] = "-";
Blockly.Msg["TEXT_CHARAT_TITLE"] = "在文本%1 里 %2";
Blockly.Msg["TEXT_CHARAT_TOOLTIP"] = "返回位于指定位置的字母。";
Blockly.Msg["TEXT_COUNT_HELPURL"] = "https://github.com/google/blockly/wiki/Text#counting-substrings";
Blockly.Msg["TEXT_COUNT_MESSAGE0"] = "计算%1在%2里出现的次数";
Blockly.Msg["TEXT_COUNT_TOOLTIP"] = "计算在一段文本中，某个部分文本重复出现了多少次。";
Blockly.Msg["TEXT_CREATE_JOIN_ITEM_TOOLTIP"] = "将一个项添加到文本中。";
Blockly.Msg["TEXT_CREATE_JOIN_TITLE_JOIN"] = "加入";
Blockly.Msg["TEXT_CREATE_JOIN_TOOLTIP"] = "添加、移除或重新排列各节来重新配置这个文本块。";
Blockly.Msg["TEXT_GET_SUBSTRING_END_FROM_END"] = "到最后一个字符#";
Blockly.Msg["TEXT_GET_SUBSTRING_END_FROM_START"] = "至字符#";
Blockly.Msg["TEXT_GET_SUBSTRING_END_LAST"] = "到最后一个字符";
Blockly.Msg["TEXT_GET_SUBSTRING_HELPURL"] = "https://github.com/google/blockly/wiki/Text#extracting-a-region-of-text";  // untranslated
Blockly.Msg["TEXT_GET_SUBSTRING_INPUT_IN_TEXT"] = "从文本";
Blockly.Msg["TEXT_GET_SUBSTRING_START_FIRST"] = "取得子串自第一个字符";
Blockly.Msg["TEXT_GET_SUBSTRING_START_FROM_END"] = "取得子串自倒数#";
Blockly.Msg["TEXT_GET_SUBSTRING_START_FROM_START"] = "取得子串自#";
Blockly.Msg["TEXT_GET_SUBSTRING_TAIL"] = "-";
Blockly.Msg["TEXT_GET_SUBSTRING_TOOLTIP"] = "返回文本中指定的一部分。";
Blockly.Msg["TEXT_INDEXOF_HELPURL"] = "https://github.com/google/blockly/wiki/Text#finding-text";  // untranslated
Blockly.Msg["TEXT_INDEXOF_OPERATOR_FIRST"] = "寻找第一次出现的文本";
Blockly.Msg["TEXT_INDEXOF_OPERATOR_LAST"] = "寻找最后一次出现的文本";
Blockly.Msg["TEXT_INDEXOF_TITLE"] = "在文本 %1 里 %2  %3";
Blockly.Msg["TEXT_INDEXOF_TOOLTIP"] = "返回第一个文本段在第二个文本段中的第一/最后一个匹配项的起始位置。如果未找到，则返回%1。";
Blockly.Msg["TEXT_ISEMPTY_HELPURL"] = "https://github.com/google/blockly/wiki/Text#checking-for-empty-text";  // untranslated
Blockly.Msg["TEXT_ISEMPTY_TITLE"] = "%1是空的";
Blockly.Msg["TEXT_ISEMPTY_TOOLTIP"] = "如果给定的文本为空，则返回真。";
Blockly.Msg["TEXT_JOIN_HELPURL"] = "https://github.com/google/blockly/wiki/Text#text-creation";  // untranslated
Blockly.Msg["TEXT_JOIN_TITLE_CREATEWITH"] = "建立文本从";
Blockly.Msg["TEXT_JOIN_TOOLTIP"] = "通过串起任意数量的项以建立一段文本。";
Blockly.Msg["TEXT_LENGTH_HELPURL"] = "https://github.com/google/blockly/wiki/Text#text-modification";  // untranslated
Blockly.Msg["TEXT_LENGTH_TITLE"] = "%1的长度";
Blockly.Msg["TEXT_LENGTH_TOOLTIP"] = "返回给定文本的字母数（包括空格）。";
Blockly.Msg["TEXT_PRINT_HELPURL"] = "https://github.com/google/blockly/wiki/Text#printing-text";  // untranslated
Blockly.Msg["TEXT_PRINT_TITLE"] = "输出%1";
Blockly.Msg["TEXT_PRINT_TOOLTIP"] = "输出指定的文字、数字或其他值。";
Blockly.Msg["TEXT_PROMPT_HELPURL"] = "https://github.com/google/blockly/wiki/Text#getting-input-from-the-user";  // untranslated
Blockly.Msg["TEXT_PROMPT_TOOLTIP_NUMBER"] = "要求用户输入数字。";
Blockly.Msg["TEXT_PROMPT_TOOLTIP_TEXT"] = "要求用户输入一些文本。";
Blockly.Msg["TEXT_PROMPT_TYPE_NUMBER"] = "要求输入数字，并显示提示消息";
Blockly.Msg["TEXT_PROMPT_TYPE_TEXT"] = "要求输入文本，并显示提示消息";
Blockly.Msg["TEXT_REPLACE_HELPURL"] = "https://github.com/google/blockly/wiki/Text#replacing-substrings";
Blockly.Msg["TEXT_REPLACE_MESSAGE0"] = "在%3中，将%1替换为%2";
Blockly.Msg["TEXT_REPLACE_TOOLTIP"] = "在一段文本中，将出现过的某部分文本都替换掉。";
Blockly.Msg["TEXT_REVERSE_HELPURL"] = "https://github.com/google/blockly/wiki/Text#reversing-text";
Blockly.Msg["TEXT_REVERSE_MESSAGE0"] = "翻转文本%1";
Blockly.Msg["TEXT_REVERSE_TOOLTIP"] = "将文本中各个字符的顺序倒转。";
Blockly.Msg["TEXT_TEXT_HELPURL"] = "https://zh.wikipedia.org/wiki/字符串";
Blockly.Msg["TEXT_TEXT_TOOLTIP"] = "一个字、词语或一行文本。";
Blockly.Msg["TEXT_TRIM_HELPURL"] = "https://github.com/google/blockly/wiki/Text#trimming-removing-spaces";  // untranslated
Blockly.Msg["TEXT_TRIM_OPERATOR_BOTH"] = "消除其两侧的空白";
Blockly.Msg["TEXT_TRIM_OPERATOR_LEFT"] = "消除其左侧的空白";
Blockly.Msg["TEXT_TRIM_OPERATOR_RIGHT"] = "消除其右侧的空白";
Blockly.Msg["TEXT_TRIM_TOOLTIP"] = "从某一端或同时从两端删除多余的空白，并返回这段文字的一个副本。";
Blockly.Msg["TODAY"] = "今天";
Blockly.Msg["UNDO"] = "撤销";
Blockly.Msg["UNNAMED_KEY"] = "匿名";
Blockly.Msg["VARIABLES_DEFAULT_NAME"] = "项目";
Blockly.Msg["VARIABLES_GET_CREATE_SET"] = "创建“设定%1”";
Blockly.Msg["VARIABLES_GET_HELPURL"] = "https://github.com/google/blockly/wiki/Variables#get";  // untranslated
Blockly.Msg["VARIABLES_GET_TOOLTIP"] = "返回此变量的值。";
Blockly.Msg["VARIABLES_SET"] = "赋值 %1 为 %2";
Blockly.Msg["VARIABLES_SET_CREATE_GET"] = "创建“获得%1”";
Blockly.Msg["VARIABLES_SET_HELPURL"] = "https://github.com/google/blockly/wiki/Variables#set";  // untranslated
Blockly.Msg["VARIABLES_SET_TOOLTIP"] = "设置此变量，以使它和输入值相等。";
Blockly.Msg["VARIABLE_ALREADY_EXISTS"] = "名字叫“%1”的变量已经存在了。";
Blockly.Msg["VARIABLE_ALREADY_EXISTS_FOR_ANOTHER_TYPE"] = "名字叫“%1”的变量已经有了另一个类型：“%2”。";
Blockly.Msg["WORKSPACE_ARIA_LABEL"] = "Blockly工作区";
Blockly.Msg["WORKSPACE_COMMENT_DEFAULT_TEXT"] = "说点什么...";
Blockly.Msg["CONTROLS_FOREACH_INPUT_DO"] = Blockly.Msg["CONTROLS_REPEAT_INPUT_DO"];
Blockly.Msg["CONTROLS_FOR_INPUT_DO"] = Blockly.Msg["CONTROLS_REPEAT_INPUT_DO"];
Blockly.Msg["CONTROLS_IF_ELSEIF_TITLE_ELSEIF"] = Blockly.Msg["CONTROLS_IF_MSG_ELSEIF"];
Blockly.Msg["CONTROLS_IF_ELSE_TITLE_ELSE"] = Blockly.Msg["CONTROLS_IF_MSG_ELSE"];
Blockly.Msg["CONTROLS_IF_IF_TITLE_IF"] = Blockly.Msg["CONTROLS_IF_MSG_IF"];
Blockly.Msg["CONTROLS_IF_MSG_THEN"] = Blockly.Msg["CONTROLS_REPEAT_INPUT_DO"];
Blockly.Msg["CONTROLS_WHILEUNTIL_INPUT_DO"] = Blockly.Msg["CONTROLS_REPEAT_INPUT_DO"];
Blockly.Msg["LISTS_CREATE_WITH_ITEM_TITLE"] = Blockly.Msg["VARIABLES_DEFAULT_NAME"];
Blockly.Msg["LISTS_GET_INDEX_HELPURL"] = Blockly.Msg["LISTS_INDEX_OF_HELPURL"];
Blockly.Msg["LISTS_GET_INDEX_INPUT_IN_LIST"] = Blockly.Msg["LISTS_INLIST"];
Blockly.Msg["LISTS_GET_SUBLIST_INPUT_IN_LIST"] = Blockly.Msg["LISTS_INLIST"];
Blockly.Msg["LISTS_INDEX_OF_INPUT_IN_LIST"] = Blockly.Msg["LISTS_INLIST"];
Blockly.Msg["LISTS_SET_INDEX_INPUT_IN_LIST"] = Blockly.Msg["LISTS_INLIST"];
Blockly.Msg["MATH_CHANGE_TITLE_ITEM"] = Blockly.Msg["VARIABLES_DEFAULT_NAME"];
Blockly.Msg["PROCEDURES_DEFRETURN_COMMENT"] = Blockly.Msg["PROCEDURES_DEFNORETURN_COMMENT"];
Blockly.Msg["PROCEDURES_DEFRETURN_DO"] = Blockly.Msg["PROCEDURES_DEFNORETURN_DO"];
Blockly.Msg["PROCEDURES_DEFRETURN_PROCEDURE"] = Blockly.Msg["PROCEDURES_DEFNORETURN_PROCEDURE"];
Blockly.Msg["PROCEDURES_DEFRETURN_TITLE"] = Blockly.Msg["PROCEDURES_DEFNORETURN_TITLE"];
Blockly.Msg["TEXT_APPEND_VARIABLE"] = Blockly.Msg["VARIABLES_DEFAULT_NAME"];
Blockly.Msg["TEXT_CREATE_JOIN_ITEM_TITLE_ITEM"] = Blockly.Msg["VARIABLES_DEFAULT_NAME"];

Blockly.Msg["MATH_HUE"] = "230";
Blockly.Msg["LOOPS_HUE"] = "120";
Blockly.Msg["LISTS_HUE"] = "260";
Blockly.Msg["LOGIC_HUE"] = "210";
Blockly.Msg["VARIABLES_HUE"] = "330";
Blockly.Msg["TEXTS_HUE"] = "160";
Blockly.Msg["PROCEDURES_HUE"] = "290";
Blockly.Msg["COLOUR_HUE"] = "20";
Blockly.Msg["VARIABLES_DYNAMIC_HUE"] = "310";